Features of Integrated Living Sewage Treatment Equipment:
1, has a good coagulation effect, Chromaticity, COD removal rate is high, the same amount can greatly improve the biochemical properties of wastewater.
2, the reaction rate is fast, general industrial waste water only takes half an hour to several hours.
3, the process flow is simple, the service life is long, the investment cost is small, the operation and maintenance is convenient, the operating cost is low, and the treatment effect is stable. Only a small amount of microelectrolytic filler is consumed during the treatment. Fill only need to be added regularly without replacement, adding the direct input can be.
4, a wide range of organic pollutants, such as: containing even fluorine, carbon double bonds, Nitro, halogenated structure of the refractory degradation of organic substances have a good degradation effect.
5, this method can achieve the effect of chemical precipitation phosphorus removal, but also by reducing the removal of heavy metals.
6, wastewater after microelectrolysis treatment will form the original ecology of ferrous or iron ions in the water, with better coagulation than ordinary coagulants, no need to add iron salts and other coagulants, COD removal rate is high, and will not Water causes secondary pollution.
The treatment of organic wastewater that has not reached the standard can be ensured by using the domestic sewage treatment technology as the pre-treatment of the wastewater of the constructed project. It is also possible to separate the higher concentration of wastewater from the production wastewater for microelectrolysis.
With the continuous increase of research and development of water treatment equipment in Guoqing environmental protection, the current production of water treatment equipment is increasing year by year in terms of product type and quantity, providing a guarantee for the good development of water treatment construction. However, there is still a certain gap between high-end products and developed countries. We still need to accelerate the pace of scientific research and strive to make the technology level of clean water treatment equipment into the ranks of world powers.
With the development of science and technology and the maturity of technology, the production technology and production technology of sewage treatment plants are constantly being reformed and developed, but in particular, it is still necessary to pass through thick grille, sewage pump, fine grille, sand sink, chemical pool, final sink and filter pool. Through the continuous operation of each program, a series of processing methods are used to achieve the purpose of clean water.
Sewage treatment mainly refers to the use of reasonable and effective treatment methods, the use of effective equipment and space to filter and sterilize collected sewage, etc., after discharge can be reused, or discharged into a specific area, does not constitute environmental and ecological pollution.
The technical discharge of domestic sewage treatment process is already the main pollution source of urban water in China, and municipal sewage treatment is the most important task of urban water conservation and urban water environmental protection.